NuDAQ PCI-6308 Series Isolated Analog Output Board User's Guide
2 Introduction 1.1 Features ƒƒ 32-bit PCI-Bus, Plug and Play, complies with PCI local bus specification Rev 2.1 ƒƒ 8-CH 12-bit voltage output ƒƒ
Introduction 3 ƒƒ Differential Linearity Error: 0.002 % Full Scale Range ƒƒ Data Transfer: Programmed I/O ƒƒ Isolation voltage: 2500Vrms (photo i
4 Introduction 200mA maximum (for PCI-6308V) 20mA maximum (for PCI-6308A, when all current output channel is 25mA) General Specifications ƒƒ Op
Introduction 5 across Windows 98, Windows NT and Windows 2000. That means all applications developed with PCIS-DASK are compatible across Windows
6 Introduction get DASYLab PRO, which include DASYLab and ADLink hardware drivers. 1.4.6 PCIS-DDE: DDE Server and InTouchTM DDE stands for Dynamic
Installation 7 2 Installation This chapter describes how to install the PCI-6308. Please follow the follow steps to install the PCI-6308 family pro
8 Installation 2.2 Unpacking Your PCI-6308 series card contains sensitive electronic components that can be easily damaged by static electricity.
Installation 9 2.3 PCI-6308V Layout Figure 2.1 PCI-6308V Layout
10 Installation 2.4 Hardware Installation Outline 2.4.1 Hardware configuration The PCI cards (or CompactPCI cards) are equipped with plug and pl
Installation 11 2.6 Connector Pin Assignment The pin assignment of PCI-6308V/6308A/6304V are shown in Figure 2.2 DI3DI2DI1DI0GNDExtVref+15V A.GN
12 Installation 2.7 Jumper Setting The PCI-6308¡¥s voltage output channels can be configured as differentvoltage range. Each output channel and it
Installation 13 2.8 Termination Board Connection The PCI-6308 is equipped with the DB-37 connector. The available termination boards include: ƒƒ
14 Registers Format 3 Registers Format The detailed descriptions of the registers format are specified in this chapter. This information is quite
Registes Format 15 3.2 I/O Address Map Most of the PCI-6308 registers are 16 bits. The users can access these registers by 16 bits I/O instruction
16 Registers Format 3.3 Digital Output Register D0~D3 is the digital output signal written to output channel. D4~D7 don¡¦t care Address: BASE + 40
Operation Theorem 17 4 Operation Theorem In this chapter, the detail operation theorem of PCI-6308V and PCI-6308A is described. Before programming
18 Operation Theorem When the applications use smaller voltage range, the PCI-6308 can still be applied. For example, if the application voltage ra
Operation Theorem 19 4.3 Current Output and Range Control The current output is implemented by a precision voltage-to-current converter XTR110.
20 Operation Theorem 4.4 Isolated Digital Output The isolated digital output circuits are as following. The output is open collector type. The i
C/C++ Library 21 5 C/C++ Library This chapter describes the software library for operating this card. Only the functions in DOS library and Windo
@Copyright 1999~2000 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 1.11: September 4, 2000 The information in this document is subject t
22 C/C++ Library 5.2 Programming Guide 5.2.1 Naming Convention There are 7 function calls provided by the C Language Library. All the functions of
C/C++ Library 23 5.3 _6308_Initial @ Description This function is used to initialize PCI 6308. Every PCI_6308 has to be initialized by this functi
24 C/C++ Library 5.5 _6308_DA @ Description This function is used to write data to D/A converters. There are 8 Digital-to-Analog conversion chann
C/C++ Library 25 5.6 _6308_DA_0_3 @Description This function is used to simultaneously write data to D/A converters of channel 0 to channel 3. Th
26 C/C++ Library 5.7 _6308_DA_4_7 @Description This function is used to simultaneously write data to D/A converters of channel 4 to channel 7. Th
C/C++ Library 27 5.8 _6308_Get_DA_Status @ Description This function is used to check the DA data sending status. Because the data transfer time f
28 C/C++ Library 5.9 _6308_DI @ Description This function is used to read data from digital input ports. There are 4 digital input channels on PCI-
C/C++ Library 29 5.10 _6308_DO @ Description This function is used to write data to digital output ports. There are 4 digital output channels on PCI
30 C/C++ Library 5.11 _6308_I2V_Control @ Description This function is used to set PCI-6308A voltage-to-current mode control. There are three mode
Product Warranty/Service 31 Product Warranty/Service Seller warrants that equipment furnished will be free form defects in material and workmanship
Getting service from ADLINK Customer Satisfaction is always the most important thing for ADLINK Tech Inc. If you need any help or service, please
Table of Contents i Table of Contents How to Use This Guide...iii Chapter 1 Introduction...
ii Table of Contents 3.3 Digital Output Register...16 3.4 Digital Input Ports...
How to Use This Guide iii How to Use This Guide This manual is designed to help you use the PCI-6308. It describes how to modify and control various
Introduction 1 1 Introduction The PCI-6308 series products are isolated analog output cards. The PCI-6308 series includes three cards: PCI-6308V:
Comments to this Manuals