ADLINK Technology cPCI-6765 User Manual Page 76

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 75
76
cPCI-8232R
cPCI-8232[R]
3U CompactPCI ATA-100 Interface Module with Optional Rear I/O
Specifications
Model Name cPCI-8273 cPCI-8273R
PICMG 2.0 R3.0
Form Factor 3U cPCI (100x160mm), 1 slot wide
cPCI Bus 32-bit/33MHz
V(I/O) 5V or 3.3V Universal V(I/O)
IEEE-1394 VIA VT6306 PCI 1394a integrated host controller
Triple IEEE-1394a ports, up to 400Mbps for each port
Supports OHCI compliant programming interface
Connector 3-port IEEE-1394, front face plate 3-port IEEE-1394, either front face plate or
rear face plate, selectable for each port
cPCI J2 Connector None Yes
OS Driver Support Windows 98/ME/2K/XP, Linux (kernel 2.4 by OHCI compatible mode)
Specifications
Model Name cPCI-8232 cPCI-8232R
PICMG 2.0 R3.0
Form Factor 3U cPCI (100x160mm), 1 slot wide
cPCI Bus 32-bit/33MHz
V(I/O) 5V or 3.3V Universal V(I/O)
UDMA IDE Promise 20269
Dual ATA-100 channels, supports up to 4 IDE devices
Supports ATA or ATAPI interface PIO Mode 0~4,
DMA Mode 0~2, Ultra-DMA Mode 0~5, up to 100MB/s burst data transfer
Connector 40-pin IDE1, Front face plate The same as cPCI-8232, plus:
44-pin IDE1 on front board 40-pin IDE2 on rear board
Type-II CF socket on front board 4-pin power connector
cPCI J2 Connector None Yes
Other Features Use only one IRQ for both channels
Supports LBA and normal CHS data mode
Automatically configuring drive type (e.g. PIO or UDMA mode)
Allows booting from HDD or CD-ROM*
OS Driver Support DOS, Windows 9x/ME/NT/2K/XP, Linux (kernel 2.4)
M o d e l n u m b e r D e s c r i p t i o n / C o n f i g u r a t i o n
cPCI-8273 3U CompactPCI 3-Port IEEE-1394 Interface Module*
cPCI-8273R 3U CompactPCI 3-Port IEEE-1394 Interface Module with Rear I/O and 50 mm RTM*
Ordering Information
cPCI-8273R
cPCI-8273[R]
3U CompactPCI 3-Port IEEE-1394 Interface Module with Optional Rear I/O
M o d e l n u m b e r D e s c r i p t i o n / C o n f i g u r a t i o n
cPCI-8232 3U CompactPCI ATA-100 Interface Module*
cPCI-8232R 3U CompactPCI ATA-100 Interface Module with Rear I/O and 50 mm RTM*
Ordering Information
Note: Only bootable from Windows NT or 2000 CD. Not allows booting from CF card.
Booting from HDD is allowed under all OS supported above.
Note: Standard package includes one ATA-100 and 4-pin power transition cable.
Note: Standard package does not include any IEEE-1394 cable.
Note: Supports up to 7 cPCI-8301 cards in one cPCI bus segment at 33MHz speed, 2 cPCI-8301 cards in one cPCI bus segment at 66MHz speed.
M o d e l n u m b e r D e s c r i p t i o n / C o n f i g u r a t i o n
cPCI-8301 3U CompactPCI 64-bit PMC Carrier Board
Ordering Information
cPCI-8301
cPCI-8301
3U CompactPCI 64-bit PMC Carrier Board
Specifications
Model Name cPCI-8301
PICMG 2.0 R3.0
Form Factor 3U cPCI (100x160mm), 1 slot wide
cPCI Bus Up to 64-bit/66MHz*
V(I/O) 5V V(I/O) is factory default, 3.3V is optional
PMC Site Single size PMC with 64-bit connector, without rear I/O
Selectable 5V or 3.3V V(I/O) environment, default is 5V
cPCI J2 Connector Yes (for 64-bit PCI)
OS Driver Support Not necessary
CompactPCI Solutions
3U Peripheral Board
Note: All specifications are subject to change without further notice.
Page view 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 113 114

Comments to this Manuals

No comments