ADLINK Technology cPCI-6765 User Manual download pdf (Page 68)

Model number Board Depth Faceplate I/O On-board I/O

cPCI-R3720 50 mm COM1, KB/MS, LAN2,USB2 LPT, COM2

Reserved 80 mm reserved reserved

cPCI-3720

cPCI-3720 series

Features

• Passive heat-sink design with low power BGA2 P-III or Celeron CPU

• Single slot wide base board with CF socket

• One 144-pin SO-DIMM socket, up to 256MB RAM

• Dual 10/100Mb Ethernet ports by Intel 82559 controller

• USB x2, COMx2, LPTx1, PS/2x1, IDEx1

• Rear I/O support LAN, COM, USB, LPT and KB/MS

• Remote Console

• Dual slot extension for 2.5" HDD housing and floppy connection

Specifications

CompactPCI Standards PICMG 2.0 R3.0; PICMG 2.1 Hot Swap R2.0

Form Factor 3U cPCI (100x160mm), 1 or 2 slots wide

CPU/Cache Intel BGA2 mobile Pentium-III 700/850MHz with 256K on-die L2 cache

or mobile Celeron 400MHz with 128K on-die L2 cache

Front Side Bus Speed 100MHz for P-III; 66MHz for Celeron

Chipset Intel 440MX

BIOS Award 2Mb flash memory

RAM One 144-pin SO-DIMM socket, up to 256MB SDRAM

cPCI Bus Interface 32-bit/33MHz, support 7 bus-mastering devices

PCI to PCI bridge: TI PCI2050

VGA None

LAN Daul 10/100Mbps Ethernet ports by Intel 82559, RJ-45 connector

IDE UDMA-33, single channel, 44-pin connector; built-in 2.5" ATA HDD

housing in 2-slot version

Floppy Standard 34-pin connector on front panel in 2-slot version;

optional add-on slim type floppy module

Flash Disk Built-in CompactFlash socket in 1-slot version;

can use 2.5" Flash Drive in 2-slot version

USB USB 1.1, one on front panel, one for rear I/O

Front Panel I/Os PS2 KB&MS, LAN1, LAN2, USB1, COM2 (RJ-45)

Backplane (rear) I/O COM1 (RS-232/422/485), COM2, LPT, LAN2, KB, MS, USB2

Rear I/O Module Options

cPCI-R3720

Watchdog Timer

1~255 sec or 1~255 min software programmable, can generate system reset

Other Features Remote Console

Watchdog timer status LED

Self-hot-swap support

Operating Temp. 0 to 55˚C (inside-chassis temp; external air-flow required)

Storage Temp. -20 to 80˚C

Shock 15G peak-to-peak, 11ms duration, non-operation

Vibration Non-operation: 1.88Grms, 5-500Hz, each axis

Operation: 0.5Grms, 5-500Hz, each axis, with 2.5" HDD

Measured Power

2.8A @ +5V; 2.5A @ +3.3V; 150mA @ +12V (peak value);

Consumption

installed with LP P-III 700MHz CPU, 256MB RAM, 2.5" ATA HDD and cPCI-8217

Certificate or Test CE; FCC class B; HALT

M o d e l n u m b e r D e s c r i p t i o n / C o n f i g u r a t i o n

cPCI-3720A/P72 3U cPCI CPU Module with Low Power Pentinm III-700, Dual LAN, 1-slot version w/o RAM, w/o HDD/FDD support

cPCI-3720A/C42 3U cPCI CPU Module with Low Power Celeron-400, Dual LAN, 1-slot version w/o RAM, w/o HDD/FDD support

cPCI-3720B/P72 3U cPCI CPU Module with Low Power Pentinm III-700, Dual LAN, 2-slot version w/o RAM, HDD, w/o FDD support

cPCI-3720B/C42 3U cPCI CPU Module with Low Power Celeron-400, Dual LAN, 2-slot version w/o RAM, HDD, w/o FDD support

cPCI-3720A/P82 1-slot version,Low Power Pentium III-850MHz with active heat-sink,Dual Ethernet

cPCI-3720B/P82 2-slot version,Low Power Pentium III-850MHz with active heat-sink,Dual Ethernet

FDD-3720 Slim type floppy expansion kit for cPCI-3720B series

Rear I/O Transition Modules

Note: Front board and rear I/O board are sold separately.

3U CompactPCI Low Power Pentium® III/Celeron® CPU Module

The cPCI-3720 is a low power, high integration 3U cPCI

system host CPU module. Its single slot base-board

design makes it possible to be an entry-level 3U

compute blade or the PC-based controller for higher

performance requirement of military, traffic control and

mission critical industrial automation applications.

Ordering Information

CompactPCI Solutions

3U CPU Module

Note: All specifications are subject to change without further notice.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 113 114

Comments to this Manuals

No comments

ADLINK Technology cPCI-6765 User Manual Page 68

Comments to this Manuals

Related products and manuals for Server barebones ADLINK Technology cPCI-6765