NuIPC / NuDAQ 743X Series 64-CH Isolated Digital I/O Board User’s Guide
2 • Introduction The above I/O cards are isolated up-to 5000 Vdc (excluding cables) for channel-to-computer isolation. It protects your computer again
Introduction • 3 1.2 Applications • Laboratory and Industrial automation • Watchdog timer • Event counter • Frequency counter and generator • Lo
4 • Introduction ♦ Optical Isolated Output Channel PCI-7432 cPCI-7432 cPCI-7432R/P PCI-7434 cPCI-7434/P cPCI-7434R/P Number of Channel 32 DO 64
Introduction • 5 ♦ General Specifications Connector: 100-pin SCSI-II connector Operating temperature: 0°C ~ 60°C Storage temperature: -20°C ~ 80°C H
6 • Introduction • PCIS-DASK: Includes device drivers and DLL for Windows 98, Windows NT and Windows 2000. DLL is binary compatible across Windows 98
Introduction • 7 1.4.5 PCIS-DDE: DDE Server and InTouchTM DDE stands for Dynamic Data Exchange. The PCIS-DDE includes the PCI cards’ DDE server. Th
8 • Getting Started 2 Getting Started This chapter describes how to install and setup the 743X Series cards. The contents in the package and unpacking
Getting Started • 9 2.2 Unpacking The PCI-7432/33/34 card contains electro-static sensitive components that can be easily be damaged by static electr
10 • Getting Started 2.3.2 cPCI-743X PCB Layout The CN1 is the I/O interface and is a 100-pin SCSI-type connector. Figure 2: cPCI-743X PCB Layout
Getting Started • 11 2.4 Hardware Installation Outline PCI configuration The PCI cards (or CompactPCI cards) are equipped with plug and play PCI cont
12 • Getting Started For cPCI-743X products (with and without rear I/O) 1. Read through this manual, and setup the jumper according to your applicati
Getting Started • 13 2.6 Connector Pin Assignment for PCI-7432, cPCI-7432, cPCI-7432R The pin assignment of the 100-pin SCSI-II connector for the 743
14 • Getting Started 2.7 Connector Pin Assignment of cPCI-7432RP The cPCI-7432RP’s pin assignment is shown in Figure 5. (1) IDI_0 (26) IDO_0 (51) I
Getting Started • 15 2.8 Connector Pin Assignment of cPCI-7433/R & PCI-7433 The pin assignment of the 100-pin SCSI-II connector for the 7433 Seri
16 • Getting Started 2.9 Connector Pin Assignment of PCI-7434 The pin assignment of the 100-pin SCSI-II connector for the PCI-7434 Series is shown in
Getting Started • 17 2.10 Connector Pin Assignment of cPCI-7434R cPCI-7434R’s pin assignment is shown in Figure 8. (1) IDO_0 (26) IDO_32 (51) IDO_8
18 • Getting Started 2.11 Connector Pin Assignment of cPCI-7434RP cPCI-7434RP’s pin assignment is shown in Figure 9. (1) IDO_0 (26) IDO_32 (51) IDO_
Getting Started • 19 2.11 Jumpers Setting Digital I/O cards often operate in noisy environments and may suffer electrostatic discharge or transient vo
20 • Getting Started Figure 11: PCI-7433 (rev. B2) Jumper Locations
Registers • 21 3 Registers The descriptions of the registers and structure of the 743X Series are outlined in this chapter. The information in this ch
Copyright 2002 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 3.34: October 22, 2002 Part NO: 50-11108-202 The information in this docum
22 • Registers 3.2 I/O Address Map All 743X series registers are 32 bits long. Users can access these registers using 32-bit I/O instructions. The
Registers • 23 3.3 Digital Input Register There are 32 isolated digital input channels on the PCI-7432 and 64 isolated digital input channels on the
24 • Registers 3.4 Digital Output Register There are 32 digital output channels on the PCI-7432 and 64 isolated digital output channels on the PCI-74
Operation Theory • 25 4 Operation Theory 4.1 Isolated Digital Input Channels The isolated digital input has an open collector transistor structure. T
26 • Operation Theory 4.2 Isolated Digital Output Channels The common ground connection of isolated digital output is shown figure 13, while common p
C/C++ Libraries• 27 5 C/C++ Libraries This chapter describes the software libraries for operating this card. Only the functions in the DOS library and
28 • C/C++ Libraries 5.2 Programming Guide 5.2.1 Naming Convention The functions of the NuDAQ PCI or NuIPC CompactPCI card software drivers uses ful
C/C++ Libraries• 29 5.3 Running the Testing Utility After installation, execute the DOS utility by typing the following command: C> cd \7432\DOS\U
30 • C/C++ Libraries PCI-7434 / cPCI-7434 / cPCI-7434R C/C++ (DOS) U16 _7434_Initial (U16 *existCards, PCI_INFO *pciInfo) C/C++ (Windows 95) U16 W_7
C/C++ Libraries• 31 5.5 Digital Input Relative Functions @ Description These functions are used to read 32-bit digital inputs data from the digital i
Getting service from ADLINK • Customer Satisfaction is the most important priority for ADLINK Tech Inc. If you need any help or service, please cont
32 • C/C++ Libraries 5.6 Digital Output Relative Functions @ Description These functions are used to write data to the digital output ports. You can
C/C++ Libraries• 33 5.7 Interrupt Source Control @ Description The 7432 and 7433 both have a dual interrupt system. Two interrupt sources can be gene
34 • C/C++ Libraries 5.8 Get Interrupt Status @ Description The 7432 and 7433 both have a dual interrupt system. Two interrupt sources can be generat
C/C++ Libraries• 35 5.9 Interrupt Enable @ Description This function is only available to Windows 95 drivers. It is used to activate the interrupt c
36 • C/C++ Libraries 5.10 Interrupt Disable @ Description This function is only available to Windows 95 drivers. This function is used to disable the
C/C++ Libraries• 37 5.11 LED Control Function @ Description The LED control function is only available to the CompactPCI rear I/O version. The cPCI-74
38 • C/C++ Libraries 5.12 Get Slot Number @ Description The Get slot number function is only available to the CompactPCI rear I/O version. The slot n
Warranty Policy • 39 Warranty Policy Thank you for choosing ADLINK. To understand your rights and enjoy all the after-sales services we offer, please
40 • Warranty Policy 5. To ensure the speed and quality of product repair, please download an RMA application form from our company website www.adli
Table of Contents • i Table of Contents Tables and Figures...iii Introduction...
ii • Table of Contents Registers...21 3.1 PCI PnP Registers ...
Tables and Figures • iii Tables and Figures Tables Table 1. Features between different 743X Models ...2 Table 2. Optical Isolat
iv • How to Use This Guide How to Use This Guide This manual is designed to help you use the 743X series products. It describes how to modify and cont
Introduction • 1 1 Introduction The 743X series products are 64-CH high-density isolated digital input and/or output cards. The 743X series products i
Comments to this Manuals