ADLINK Technology MXE-5104M User Manual download pdf (Page 40)

30 BIOS Settings

Matrix MXE-5000 Series

User’s Manual

Intel® SpeedStep™ Tech

This option enables or disables Intel SpeedStep™ technology.

4.2.2 SATA Configuration

This item specifies whether the SATA channels should be ini-

tialized in Compatible Mode or Enhanced Mode. The settings

are Disabled, Compatible and Enhanced. The default option is

Compatible.

4.2.3 SuperIO Configuration

Serial Port1/ Port2/ Port3/ Port4 Address

These four options specify the base I/O port address of serial

port1 to serial port4.

Note: Do not set the same value for different serial ports to

avoid resource conflict.

4.2.4 Hardware Health Configuration

The hardware health option allows users to monitor hardware sta-

tus including CPU temperature, system temperature, and system

voltages (Vcore, +5V, +3.3V, +12V, +1.8V, 5VSB, VBAT).

4.2.5 ACPI Configuration

High Performance Event Timer

Enables or disables HPET feature.

4.2.6 USB Configuration

Legacy USB Support

Legacy USB Support refers to USB mouse and keyboard sup-

port. Normally if this option is not enabled, an installed USB

mouse or keyboard will not become available until a USB com-

patible operating system is fully booted with all USB drivers

loaded. When this option is enabled, attached USB mouse or

keyboard are activated even when no USB drivers are loaded

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

No comments

ADLINK Technology MXE-5104M User Manual Page 40