ADLINK Technology PCIS-8580-13S User Manual download pdf (Page 16)

8Installation

2.2 Unpacking

The ADLINK PCIS-8580 system contains some electro-static sen-

sitive components that can be easily be damaged by static elec-

tricity. For this reason, the card and chassis should be handled on

a grounded anti-static mat and the operator should wear an anti-

static wristband during the unpacking and installation procedure.

Please also inspect the components for apparent damage.

Improper shipping and handling may cause damage to the compo-

nents. Be sure there are no shipping and handling damage on the

components before continuing.

You are now ready to set up your PCIS-8580 PCI-to-PCI expan-

sion system.

Note: DO NOT APPLY POWER TO THE CARD OR CHASSIS IF

IT HAS BEEN DAMAGED.

2.3 Getting Start

In this section, we’ll illustrate the step-by-step instructions to set

up your PCIS-8580 PCI-to-PCI expansion system.

Install PCI Expansion Card into your Host System

The first step is to install the PCI expansion card (LPCI-8575) into

your host system. You can find an individual carton in the whole

package which contains the PCI expansion card. The steps of

installation are:

1. Turn off your host computer.

2. Open the chassis of the host computer.

3. Remove the package of PCI expansion card. (Please

wear your anti-static facilities when you handle the card.)

4. Plug the PCI expansion card into an available PCI slot

and screw it to the chassis.

5. Close the chassis.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

ADLINK Technology PCIS-8580-13S User Manual Page 16